China manufacturer low density graphite anode rod:Graphite rods are often used for following:
1. Refractory material:
Widely used in the metallurgical industry.
2. Conducting material:
In the electronics industry, widely used for graphite electrode,
brush,, etc
3. Wear-resisting material and lubricant:
Use graphite as wear-resisting and lubrication materials, can be
100m/s speed sliding in - 200 ~ 2000 °C temperature range, no or
less lubricanting oil.
4. Sealing material:
It can be as sealing ring in the equipment, such as centrifugal
pump, hydraulic turbine , etc.
5. Anticorrosion material:
Widely used in petroleum, chemical, hydrometallurgy departments.
6. Protection materials
Insulation, high temperature resistant, radiation
Specifications:
| Diameter | length (mm) | around weight kgs |
| Φ20 | 1700 | 1 |
| Φ25 | 1700 | 1.5 |
| 1900 | 1.68 |
| 2200 | 1.95 |
| 2250 | 1.98 |
| Φ30 | 1700 | 2 |
| 1900 | 2.24 |
| 2200 | 2.59 |
| Φ35w | 1700 | 2.85 |
| 1900 | 3.2 |
| 2100 | 3.52 |
| 2200 | 3.68 |
| Φ40 | 1700 | 3.5 |
| 1900 | 4 |
| 2100 | 4.32 |
| 2200 | 4.63 |
| 2400 | 5.05 |
| 2270 | 4.7 |
| Φ45 | 2250 | 5.21 |
| Φ50 | 1700 | 5.5 |
| 1920 | 6.3 |
| 2100 | 6.8 |
| 2200 | 7.12 |
| 2500 | 8 |
| Φ60 | 1400 | 6.5 |
| 1700 | 7.9 |
| 1300 | 6.04 |
| Φ63 | 2000 | 8.7 |
| Φ70 | 2100 | 5.68 |
| 2250 | 5.5 |
| 2500 | 6.3 |
| Φ72 | 2250 | 15.7 |
| 2470 | 17 |
| Φ75 | 2250 | 16.4 |
Technical date sheet:
| Specifications | Unit | Value |
| Bulk Density | g/cm3 | 1.65-1.80 |
| Compressive Strength * | MPa | 20-55 |
| Bending Strength * | MPa | 10-30 |
| Elastic Modulus * | GPa | 9-21 |
| Specific Resistance * | μ Ω·m | 5.0-15.0 |
| Ash | % | 0.05-0.5 |
